Please set your country in your "Forum Profile" !
First, I would like to welcome everyone to this K1600 board - covering K1600GT and K1600GTL.
I have in mind a clean and easy to use board – without any advertising or other flipping and rotating images all over.
Main section is probably the Forum, but also find a Gallery (Also for short videos), and the Download section.
Also popular is the K1600 service manual. (You will have to be logged in to see it)
I will always try to keep an updated list of manuals and other important documentation current in the Download section, but please help me out if you find something useful for others out there!
Please put yourself on the Member map, and your country in your profile.
A note on the Member map is that do not put the pin in an exact position where you live – but to the nearest city or place.
Also be aware that I have enabled quite a few languages for the board, and you are able to set this and a lot of other settings after you have registered. But I will prefer to keep the language used for messages to be English.
If you have a strong feeling for a dedicated section in another language – send me a note!
This site is also available for iPhone and iPod, and will automatically forward you a more suitable version!
And for mobile users – Tapatalk is also fully integrated.
BTW - You can also reach this board using http://k6gt.com or http://k6gtl.com
A new member of this family is the BMW R 1200RT site at : http://www.1200rt.com
2014-07-21 17:44:35 by FP-NLD
Views: 80 | Comments: 0
2014-07-20 10:50:24 by FP-NLD
Views: 207 | Comments: 7
Many of you will know the GS911. The K1600 has a 3rd generation CAN bus and doesn't work with the current GS911.
The company that makes the GS911 (Hexcode) has been working for 3 years to 'decrypt' the new protocols for the K1600 (and also the ...
2014-07-20 08:09:09 by STeinar
Views: 87 | Comments: 1
Well - the R 1200RT has always fascinated me, and after a few persons asked me for a site dedicated for the RT - I decided to put up one - using the same setup as this one.
Help me spreed the word out there - and lets see if it's possible ...
Pages:  2